Patent on Roller Door Insulation NO.2010200820

SPECS ON ROLLER DOOR 
( Door Size  2.7m x 2.4m )

Left Hand Panel  x 1
Right Hand Panel  x 1
Tubes Liquid Nails  x 3
Trimming Knife  x 1
Caulking Gun   x 1
Roll of Tape   x 1

1. If the door is narrow, trim right hand panel at the centre, leave bottom long and trim as required
2. If the door is a manual lift, cut around the centre locking device, use cloth to make contact and smooth out panel
3. If the Roller door is to close to door head, adjust the Roller door at the top brackets
4. Make sure the guides on each side of door channel have enough room to clear the Insulation
5. When the fitting is complete run tape down the centre of the door, around the locking device and across the bottom of the door 

WATCH OUR INSTALLATION VIDEO

EASY INSTALLATION VIDEO IS ONLINE