Home Insulation Batts

POLYESTER INSULATION BATTS
"Our most popular insulation product and it is all Australian made.

• Manufactured from Synthetic Carbon fibres and polymer fibres complying to Australian Standard 4859.1
  
  
• They provide Efficient Thermal Insulation against extremes of heat and cold as well as reduce noise levels in residential, commercial and industrial buildings.
  
  
• Polyester Insulation batts are non-allergenic, extremely clinical product, suited to asthma sufferers and is non-toxic.
  
  
• Vermin Proof
  
  
• Fire Retardant, therefore the insulation batts will not spread flame.
  
  
• It's manufactured sizes are designed to fit snugly in between ceiling rafters and wall studs.
  
  
• Ceiling sizes: 430mm wide & 580mm wide.
  
  
• Wall sizes: 600mm wide 1160mm long.
  
  
• Thickness is approximately 150mm

WOOL INSULATION BATTS

• This product provides the best Home Insulation by up to 6 degrees (celcius) when compared to other insulating products.
  
  
• Wool Insulation batts have a thermal advantage over some of the other Iinsulation fibre materials.
  
  
• Wool Iinsulation batts are blended with Polymer fibres to assist in its overall performance.
  
  
• The Woolen Batts are treated in accordance with recommendations of CSIRO report G69 with safe natural mineral solutions to avoid known predators.
  
  
• Wool Insulation Batts absorbs moisture which helps to preserve roof timbers from mould.
  
  
• Wool is naturally flame resistant when tested to Australian Standard 1530.3
  
  

  Ignitability Spread of flame Heat evolved Smoke developed

  O O O O-1

• Ceiling sizes: 430 X 1160 & 580 X 1160
  
  
• Walls sizes: 610 X 1160

 

FIBREGLASS INSULATION BATTS
The most economical of our insulation products:

• Fibreglass Insulation Batts are manufactured from glasswool and they are easy to install in floors ceilings walls and roofs.
  
  
• Fibreglass Batts have a lifetime warranty, are flame proof, allergy free, will not rot, mould or deteriorate.
  
  
• Fibreglass Ceiling Batts come in a range of "R" ratings, they are: R2, R2.5, R3, R3.5, R4 & R5.
  
  
• Available in various thicknesses from 90mm to 220mm depending on their "R" rating.
  
  
• Sizes are 430mm wide & 580mm wide X 1160mm long.
  
  
• Domestic properties are either R2.5 or R3 as this is the "R" rating for the Eastern States in Australia.
  
  
• Glasswool Batts are slightly alkaline with a PH of 8.9 in accordance with BS 3958 - part 5.
  
  
• When in contact with steel, copper or aluminium Glasswool Batts will not cause corrosion, and when immersed in water has negligible capillarity action.